Is your pressroom crew spending more time scrubbing their hands than running the press?
UV inks are the gold standard for high-quality label printing. They are also a nightmare for skin. They stick. They stain. They irritate.
Most printing facilities rely on heavy-duty pumice cleaners or harsh solvents to get the job done. This "clean-up" approach is outdated. It is also damaging your team’s most valuable tools: their hands.
It is time to stop cleaning and start preventing.
The Toxic Reality of UV Inks
UV inks aren't like standard water-based or solvent-based inks. They contain acrylates and photoinitiators. These are powerful sensitizers.
Once UV ink hits your skin, it doesn’t just sit there. It penetrates the pores. It bonds with the surface.
Repeated exposure leads to more than just messy hands. It leads to:
- Allergic Contact Dermatitis: A permanent sensitivity that can end a printing career.
- Chronic Dryness: Cracked skin that bleeds and gets infected.
- Chemical Absorption: Harmful monomers entering the bloodstream through the skin barrier.
If your operators are bare-handing press parts or cleaning plates with standard industrial soap, they are at risk.
Why Your Current Hand Cleaner is Failing
Most pressrooms use products like GOJO or other pumice-based soaps. While these are popular, they are often the wrong tool for UV ink.
Pumice is an abrasive. It works by "sanding" the dirt off your skin.
When you use an abrasive on skin covered in UV ink, you are creating micro-abrasions. These tiny cuts act as highways for the ink's chemicals to enter the body.
The result? You aren't just cleaning the ink; you are rubbing it in.
Furthermore, these cleaners strip the natural oils from the skin. This leaves hands vulnerable to the next round of ink exposure. It is a cycle of damage that costs you in downtime and worker health.
The 'Invisible Glove' Solution
ONWEX Invisible Protective Gloves change the rules of the pressroom.
Instead of attacking the ink after it has bonded to the skin, ONWEX prevents the bond from ever happening.
It is an advanced barrier gel. You apply it before the shift starts. It dries in seconds, creating a microscopic, breathable shield.
When UV ink, varnish, or adhesives hit the skin, they stay on top of the barrier. They cannot reach the pores. They cannot penetrate the skin.
Stop Scrubbing. Start Rinsing.
The biggest benefit? The cleanup.
When your team is ready for lunch or the end of the shift, they don't need to reach for the pumice. They don't need to spend 10 minutes at the sink.
They just use water.
The water dissolves the barrier, and the ink slides off with it. No scrubbing. No chemicals. No damage.
Boosting Pressroom Efficiency
Time spent at the sink is dead time.
In a high-volume label manufacturing environment, every minute matters. If a four-person crew spends 10 minutes cleaning up three times a day, that is two hours of lost production every single day.
Over a year, that is hundreds of hours of labor wasted on hand scrubbing.
ONWEX saves 20-40 minutes daily per worker.
By switching from "cleaning" to "preventing," you:
- Reduce water and soap costs significantly.
- Eliminate the need for expensive, specialized ink removers.
- Keep your crew on the press, not at the sink.
The hidden cost of hand cleaners is a drain on your bottom line. ONWEX fixes the leak.
Healthier Hands, Better Morale
A printer with cracked, bleeding hands is a less efficient worker.
Skin irritation leads to discomfort, distraction, and increased safety risks. Protective gloves are often discarded because they reduce dexterity or make hands sweat.
ONWEX provides the protection of a glove without the loss of touch. Your operators can feel the substrate. They can adjust the tension. They can do their jobs with precision.
Comparison: ONWEX vs. Standard Cleaners
| Feature | Standard Cleaners (e.g., GOJO) | ONWEX Invisible Gloves |
|---|---|---|
| Action | Reactive (Cleaning) | Proactive (Prevention) |
| Method | Abrasive Scrubbing | Protective Barrier |
| Skin Impact | Strips Oils, Causes Abrasions | Protects and Conditions |
| Cleanup Time | 5-10 Minutes | Under 60 Seconds |
| Ink Interaction | Rubs chemicals into pores | Keeps chemicals on surface |
| Cost Efficiency | High soap/water waste | High-yield (500-800 uses) |
Simple Application for Busy Crews
Integrating ONWEX into your workflow is easy.
- Apply: Start with clean, dry hands.
- Rub: Evenly coat your hands, including under the fingernails.
- Dry: Wait 30 seconds for the barrier to set.
- Work: Run the press as usual.
- Rinse: Use water to wash away the barrier and the mess.
The Professional Choice for Label Manufacturing
Professional label printing requires professional-grade protection.
Relying on generic hand soaps for toxic UV inks is a risk to your business and your employees.
ONWEX is designed for the industrial environment. One 600ml bottle provides up to 800 uses. It is a cost-effective, high-performance solution that replaces the shelf full of soaps, lotions, and solvents.
Stop the scrubbing. Protect your team. Protect your profit.
Shop ONWEX Invisible Protective Gloves today.
0 comments